#Kodak aqua image cleaner skin

'The most common findings on autopsy has been fluid accumulation (edema) in the lungs. Disturbances in equilibrium occurred at 1900 ppm with marked incoordination at 5000 ppm.' 'Early symptoms of CNS depression (dizziness, light-headedness) have been reported at 450 to 900 ppm. It is included in the Montreal Protocol because of its large production for mainly emissive uses.' lol '1,1,1-Trichloroethane has been given an ozone depletion potential of 0.1, which is 10 times lower than most chlorofluorocarbons. Trichlor seems to be less harmful to the ozone than an old can of aqua-net. a career in chloroform that would necessitate higher levels of precaution You don't wash the film off after you treated it to some trichlor, do you? Do you? Might as well use it safely and then dump it. What does waste disposal do with trichlor once they get it? Bottle it up and dump? I don't know. I don't think it's very responsible to just scare someone out of doing something. I think it's responsible to do just that. Who said I'm not a responsible person? I'm asking questions. Scott Norwood was just kicking wide right. Victor, Ny has an area above the accepted level of trichlor in the groundwater -a superfund site- and it has been 20 years since they knew it was contaminated. What about Superfund sites? Who gives a shit? Only the people that live in or near those sites and a few people who can build a reputation off itĬan you name all the sites around you that are pulluted? You march every weekend and tie ribbons? That shits fake.

We press things upon people all the time. Are you squeaky clean, Kino? I doubt it? Where are your balls? You don't pollute? Pollute is just a nice way of saying poison, right? A few ounces of Chloroform against the thousands of pounds of whatever harmful substances flooding into our environment every year? Sure, a few ounces of something is bad enough since if it's OK for me I should allow everyone a few ounces of stuffīut everyone does have a few ounces of stuff. If you have to use it, and I would advise you don't, do so outside and very sparingly.Ĭome on, Kino. The liquid also instantly goes into your blood stream and you can pass out from over exposure in about 10 minutes of use in a improperly ventilated room.

#Kodak aqua image cleaner skin

The thing about Perc, and even more so Trichor, is its amazing de-fatting capabilities dip your finger in it and it will turn white instantly as the liquid evaporates, as all the fat from the first few layers of skin are instantly removed. You probably shouldn't use this at home even if you can find it, as you need Perc resistant gloves, an organic vapor cartridge air mask and protective eye wear, as well as an semi-annual blood test to screen for blood disorders and cancer.

Perc (for short), better known as dry-cleaning fluid and used in motion picture wet gate printing operations for base scratch abatement, has been pressed into service as the next active solvent for motion picture cleaning, but we found it less effective than Trichlor as it has a higher volatilization point. The reason for banning is that it is a ozone depleting chemical and for its' toxicity. Motion picture labs used an ultrasonic bath to greater and lesser effect, but I'm not sure what fluid was used, I'd imagine that it's still used, there are lots of motion pics shot on film still.ġ:1:1 Trichlor has been banned for some time now by International Treaty for film cleaning and Perchloroethylene has replaced it (at least in some parts of the USA), but that appears to be on the way out as well. It was advisable to swap the section of the velvet in contact with the film every 100-200 feet to avoid the possibility of accumulated grunge being redeposited on the film. We used Freon, which was not particularly safer, certainly dodgy for the environment (but we didn't appear to have one of those at that time!!)įor what's it's worth the technique was to conservatively dampen a velvet cloth with Freon (real cotton velvet BTW, not synthetic, to avoid static) and wrap it around a section of the roll of the film, usually holding the sandwich against the horizontal bench surface, and then wind the film from reel to reel at a moderate speed, aiming to have the film surface dry before it met the roll on the take-up spool. My time in film cutting rooms commenced after trichloroethylene had been stopped, as I understand it following action by the British unions.